Why do you charge for the proofing of the backpack? This is a question that customers care about. OEM/ODM Backpack Manufacturer will tell you why there is a charge for proofing.

Usually, backpack manufacturers have a calculation method for boarding. For example, the price of nylon material is 200.00, the price of PU is 300.00, and the price of leather is 600.00. Of course, these require customers to provide raw materials themselves, and some conditions are given here, such as the real sample is only the price of the reproduction. If there is no real sample, relying on providing sketches, then the charge is higher in this case, which is unacceptable to many people, such as leather handbags, but there is no real object, only the design draft, so the version room needs to be produced for comparison. After the test sample, the confirmation sample will be issued. Even so, there are still places for modification. Therefore, in this industry, many board houses charge as high as 2000.00. Some people say that this is wrong. Will this be too expensive? /1 board is not enough to support a sample house. The level of masters who are out of line, who can see the pictures out of the way, and the output is relatively accurate, is usually above 6000.00-8000.00, and their living and accommodation must also be considered. Social security and the like add up to almost 10,000.00 for a master's. What about the loss of tools and materials before the rent?

In addition, the salary of the backpack manufacturer’s boarding place is not low at present, more than 4,500.00, and the table salary is about 3,000.00. Then, the daily wages of these three people add up to several hundred, so this kind of 2,000 yuan Edition, how many can be produced in a day? Prototyping is different from mass production. You need to wait and wait, such as not drying the oil side, cutting materials, repairing cars, putting on sliders, burning ribbons, nailing and buttoning, and loading high-post cars. On average, the average of three people It’s good to be able to produce one sample a day, maybe this kind of person who is out of line with pictures can’t make 30 samples in a month, if you don’t see it clearly, you might as well make a list yourself, if you still don’t know it, you can make it yourself It is calculated as a model house, and there is no problem if there is a business coming to the door, but what if it is not accepted? Doesn't the version division accept labor?

At the same time, backpack manufacturers will charge specific fees for some specific samples, just like the mold fee. When proofing, it is indicated that the customer provides it, that is, the customer pays the fee. If the proof does not need to open the mold, the time for proofing Generally speaking, the operation of the printing room is convenient, the more processes involved, the more complicated the proofing, such as the need for engraving, laser, silkscreen, etc., we can't simply look at how much a sample costs, it is a bit irresponsible to say so, and it is not It’s not that the cost cannot be calculated. With the above explanation, if you encounter similar problems, you can understand by adding up the required costs. However, there are still many customers who are unwilling to pay this cost. Some factories, in order to accept orders, Therefore, it is a kind of rhetoric to promise to refund the version fee after the order reaches a certain amount or to charge it according to the large quantity, because many customers may not have an order for proofing samples, and what is even more exasperating is that they will go to other factories for production after proofing, and it is even worse. Kindness, this is enough to make the proofing party have to charge the sample handling fee in advance if the customer really wants to take this step, and the loss will not be so outrageous.

As far as the current market situation is concerned, customers provide materials, main and auxiliary linings, zippers, and hardware. Customers are responsible for mold costs, and their prices vary.

But why is there such a big gap in the laying costs of backpack manufacturers? It is because some products are really difficult to make in terms of craftsmanship. If you don’t do it right, calculate the man-hour value from the sum of the time consumed to get the total price, so it is not difficult to understand. Experienced masters have considerable experience in certain types of bags and obviously avoid detours. However, the labor of such a master is much higher than that of ordinary masters, and it is also included in the cost. Isn't this all the same reason?