In order to solve the problem of the customized colors of luggage, the best way at present is to continuously reach the final target color in a waste way. In layman's terms, it is to make several batches until it is what you want. Of course, for luggage customization, the waste itself is increasing the cost. Of course, is there any one-time molding dyeing that is very good? The answer is yes. Just a small chance of success. Because even the best fabric factory has chromatic aberration, it is normal. How to control the customized color of the luggage, basically the above suggestions have already given the answer.

The fabrics customized for bags are mostly polyester and nylon fabrics. Major fabric manufacturers have a stock supply of spot fabrics with various textures and colors. Under normal circumstances, the colors can be found in relatively close colors, but when encountering high requirements for colors, the customer then has to go to the fabric factory for processing and dyeing. It sounds like there is no problem, the logic is quite reasonable. It is often not so simple in reality. First of all, we will understand from the simple analysis of the operation process of dyes. If you want to customize color dyes, you must first weave cloth, and then dye it with a white-grey cloth. Before dying, you need to make a beaker to make a small sample for the customer to confirm the color, but often this step will have a color difference with the finished product, and then the next step will be The dyeing tank is prepared according to the color ratio, and then the dyeing is carried out, and the colored fabric can enter the process of brushing and setting. After the process is all over, the colored fabric can come out of the finished product. Generally, this process is fast and takes a few days, and slowly takes more than half a month.

After the introduction of the dyeing process of customized fabrics for bags, we can analyze the difficulties in color control of luggage manufacturers and how to deal with them. The first point is that each cloth dyeing requires a certain minimum order quantity to be customized. The minimum basic material is one meal. If it is the most commonly used Oxford cloth of 600D, it also needs about 1000 meters. If you can't use these quantities for customized bags, it is recommended that you choose the finished materials directly. The time is short and the color can be seen directly in the finished product. That is to say, this kind of customized material is only suitable for customers with a large amount of customized luggage. Another problem is that what you see is not necessarily what you get. We all know that color is displayed on different media (materials) with the same pigment and is not the same color, and each color itself has a variety of colors (Pantone color card can not reflect all colors). When dyeing, it is often necessary to use a beaker to match several close colors, and then dye a few small pieces for customers to choose from. However, the different differences in dye materials and the process itself will make the dyed fabrics with the determined color ratio biased. color.